HP StorageWorks P9000 Performance Advisor Software v5.2 Command-line User Interface Reference Guide (T1789-96316, May 2011)

Displays readable output.–hr
Prints the usage statement.–?
NOTE:
The -st and –et options are supported with the –pid option only. The array serial number and
–dkc are required elements.
Examples
thp dkc <array sn no> -hr
thp -dkc 10090 -pid 1 -hr
aouthp dkc <array sn no> -L
aouthp dkc <array sn no> -pid 1
aouthp dkc <array sn no> -pid 1 st 02.23.2006 16:00:00 et 02.23.2006
16:15:00
SNAPSHOT
Syntax
snapshot -dkc <serial #> [-pid <snapshot pool id>] [-auth <user:passwd>]
[-ms <URL>] [-L] [-d<char>] [-hr] [-?] [-pf <password file>]
Supported disk array types
XP and P9000 disk arrays
Description
Enables you to obtain Snapshot pool related information. This command provides the Snapshot pool
occupancy value in percentage.
Switches
Required. Specify the array serial number.–dkc <serial #>
Specify the address of a management station in the format <http://path.to.manage-
mentstation:<port>> or <https://path.to.managementstation>.
–ms <URL>
Specify a user name and password pair in the format user name:password.
–auth <user:pass-
wd>
Can be used in place of –auth.
NOTE:
The password file must be created using the encrypt command only.
–pf <password
file>
HP StorageWorks P9000 Performance Advisor Software Command-Line User Interface Reference
Guide 49