HP StorageWorks P9000 Performance Advisor Software v5.2 Command-line User Interface Reference Guide (T1789-96316, May 2011)

Specify the delimiter for delimited display.–d

Displays data in a readable format.–hr

Prints the usage statement.–?

NOTE:

The -st and –et options are supported with the –pid option only.

Examples

snapshot dkc <array sn no> -hr

snapshot dkc <array sn no> -L

snapshot dkc <array sn no> -pid 1

snapshot dkc <array sn no> -pid 1 st 02.23.2006 16:00:00 et 02.23.2006

16:15:00

JNL

Syntax

jnl -dkc <serial #> [-jid <journal pool id>] [-auth <user:passwd>] [-ms

<URL>] [-L] [-resp] [-d <char>] [-hr] [-?] [-pf <password file>] [-st

<MM.DD.YYYY hh:mm:ss>] [-et <MM.DD.YYYY hh:mm:ss>]

Supported disk array types

XP and P9000 disk arrays

Description

Enables you to obtain Continuous Access Journal related information. This command provides the

following Continuous Access Journal information:

JID — Displays the journal group ID

MU — Displays the mirror descriptions on journal group

CTG —Displays the CT group ID for the journal group

JNLS —Displays the following status in the journal group

Primary Journal:

Constant valueStatus valueString

0Journal pool is not used in a journal group.JSTAT_SMPL

1This means P(S)vol Journal is Normal Normal.JSTAT_PJNN

2This means P(S)vol Journal is Suspend Normal.JSTAT_PJSN

CLUI commands50