HP StorageWorks P9000 Performance Advisor Software v5.2 Command-line User Interface Reference Guide (T1789-96316, May 2011)

3This means P(S)vol Journal is Normal Full.JSTAT_PJNF
4This means P(S)vol Journal is Suspend Full.JSTAT_PJSF
5
This means P(S)vol Journal is Suspend Error including link
failure.
JSTAT_PJSE
Secondary Journal:
Constant valueStatus valueString
17This means S(S)vol Journal is Normal NormalJSTAT_SJNN
18This means S(S)vol Journal is Suspend Normal.JSTAT_SJNF
19This means S(S)vol Journal is Normal Full.JSTAT_SJSN
20This means S(S)vol Journal is Suspend Full.JSTAT_SJSF
21
This means S(S)vol Journal is Suspend Error including Link
failure.
JSTAT_SJSE
Displays the actual number of paths.AP
Displays the usage rate of the journal pool in percentage format.U(%)
Displays the sequence number for the journal group ID, called the Q-marker.Q-Marker
Displays the number of remaining Q-Markers within each journal volume.Q-CNT
Displays the number of volumes configured for the journal group.Num
Displays the ID of the volume configured for the journal group.LDEV#
Displays the average read response time of the volume configured for the journal group.Avg Read
Displays the maximum read response time of the volume configured for the journal group.Max Read
N/AAvg Write
N/AMax Write
NOTE:
Average and Maximum write metrics are not supported for the continuous access journal pool LDEVs.
Switches
Required: Specify the array serial number.—dkc <serial #>
Specify the journal ID.
–jid <journal pool
id>
The journal LDEV's read and write response time.–resp
HP StorageWorks P9000 Performance Advisor Software Command-Line User Interface Reference
Guide 51