HP StorageWorks P9000 Performance Advisor Software v5.2 Command-line User Interface Reference Guide (T1789-96316, May 2011)

Specify the address of the management station in the form of
<http://path.to.managementstation:<port>> or <https://
path.to.managementstation>
–ms <URL>
Specify a user name and password pair in the format user name:password.
–auth <user:pass-
wd>
Required. Specify the array serial number.– dkc <serial #>
Required. Specify the start time in the format mm.dd.yyyy hh:mm:ss.
–st <mm.dd.yyyy
hh:mm:ss>
Required. Specify the end time in the format mm.dd.yyyy hh:mm:ss.
–et <mm.dd.yyyy
hh:mm:ss>
Specify the filename to send the data that is retrieved.
(If the file exists, the data is appended.)
–file <filename>
Specify the version.
The 010500 and 020000 versions are currently supported. The 010500 version is the
default. XP12000/XP10000 or later must use –dver 020000.
Enter 020000 to display the EXT-LUN information.
This creates the following output files:
nl
ldev_<filename>
nl
dkc_<filename>
nl
port_<filename>
nl
clpr_<filename>
–dver <XXXXXX>
Specify the option to display information.
read – for ldev read response time
nl
write – for ldev write response time
nl
all – for ldev read and write response time
Can be used only with the –dver option.
The -dver must be 020000.
–resp <option>
The option to display the RAID Group utilization.
The -dver must be 020000.
This option can be used with the resp option.
–rgutil
The option to display all the LDEVs that belong to a journal.–jnl
Prints the usage statement.–?
Examples
exportdb -dkc 10055 -st 09.14.2006 12:00:00 -et 09.14.2006 13:00:00 -dver
020000 -file test.csv -resp all
exportdb -st 09.16.2003 05:00:00 -et 09.16.2003 07:15:00 -file output.txt
-dkc 10033 -dver 020000 hr
Exporting data
To export data, complete the following steps:
CLUI commands54