HP StorageWorks P9000 Performance Advisor Software v5.2 Command-line User Interface Reference Guide (T1789-96316, May 2011)

C Sample outputs
This section identifies sample outputs of the most used commands.
NOTE:
Labels in labeled outputs (specified by –hr or –L in the command line) are in bold. Additionally, for
commands that display different output for XP and P9000 disk arrays, the outputs are grouped based
on the disk array type.
DKCS
For XP disk arrays
dkcs -hr -dkc 10055
Array Type: XP 12000
Serial #: 10055
Record Time: 21:05:00
Record Date: 05/12/2010
Micro Code: 50-09-74/00
Raid Manager Lib: 01.14.02
Chip Data: ACP Data:
E = 0% 0% 0% 0% 0% 0% 0% 0% A = 16% 22% 16% 22% 16% 22% 16% 22%
F = 32% 31% 0% 0% 0% 1% 0% 0% B = 0% 0% 0% 0% 0% 0% 0% 0%
G = 0% 0% 0% 0% 0% 0% 0% 0% L = 0% 0% 0% 0% 0% 0% 0% 0%
H = 0% 0% 0% 0% 0% 0% 0% 0% K = 0% 0% 0% 0% 0% 0% 0% 0%
Q = 0% 0% 0% 0% 0% 0% 0% 0% M = 16% 22% 16% 22% 16% 22% 16% 22%
R = 0% 4% 0% 0% 1% 1% 0% 0% N = 0% 0% 0% 0% 0% 0% 0% 0%
T = 0% 0% 0% 0% 0% 0% 0% 0% X = 0% 0% 0% 0% 0% 0% 0% 0%
U = 0% 0% 0% 0% 0% 0% 0% 0% W = 0% 0% 0% 0% 0% 0% 0% 0%
A = 0% 0% 0% 0% 0% 0% 0% 0%
B = 0% 0% 0% 0% 0% 0% 0% 0%
L = 0% 0% 0% 0% 0% 0% 0% 0%
K = 0% 0% 0% 0% 0% 0% 0% 0%
M = 0% 0% 0% 0% 0% 0% 0% 0%
N = 0% 0% 0% 0% 0% 0% 0% 0%
X = 0% 0% 0% 0% 0% 0% 0% 0%
W = 0% 0% 0% 0% 0% 0% 0% 0%
SM Bus = 3% Cache Usage = 5772 MB
CM Bus = 0% Cache Size = 16384 MB
Cache Pending = 2 MB
Cache Side File = 0 MB
HP StorageWorks P9000 Performance Advisor Software Command-Line User Interface Reference
Guide 73