HP StorageWorks P9000 Performance Advisor Software v5.4 Troubleshooting and FAQs Guide (T1789-96336, April 2012)

Solution or WorkaroundError DescriptionError Title
Upgrade the physical memory on your
management station to 1 GB RAM or
higher. The installation wizard will exit
now. After you upgrade the physical
memory, double click PA_Server.exe
to resume the installation of P9000
Performance Advisor.
The installation wizard has detected that
sufficient physical memory is not available
on this management station. There must be
at least 1 GB of physical memory available
for the installation wizard to proceed.
Insufficient physical
memory on this
management
station.
Create at least 1 GB of free disk space in
your management station’s
<Install_drive>\TEMP folder
(required only if you are selecting a
Complete installation for P9000
Performance Advisor).
The installation wizard has detected that
sufficient free disk space is not available
in the <Install_drive>\TEMP on this
management station.
Insufficient free disk
space in the
<Install_drive>\
TEMP folder on this
management
station.
Create the domain administrator group on
your management station if you want to
implement Domain authentication method.
For more information on Domain
authentication method, refer to the P9000
Performance Advisor install guide available
on Disk 1. The installation wizard will exit
now. After you create the groups, double
click PA_Server.exe to resume the
installation of P9000 Performance Advisor.
The installation wizard has detected that
the administrator group does not exist on
your management station. This group must
be created for the installation wizard to
proceed.
The entered admin
group does not exist
in the domain
provided.
Create the domain user group on your
management station if you want to
implement Domain authentication method.
For more information on Domain
authentication method, refer to the P9000
Performance Advisor install guide available
on Disk 1. The installation wizard will exit
now. After you create the groups, double
click PA_Server.exe to resume the
installation of P9000 Performance Advisor.
The installation wizard has detected that
the user group does not exist on your
management station. This group must be
created for the installation wizard to
proceed.
The entered user
group does not exist
in the domain
provided.
Upgrade the existing version of P9000
Performance Advisor and the host agents
to v5.2, or a later version. For more
information, refer to the P9000
Performance Advisor install guide available
on Disk1. The installation wizard will exit
now. After you upgrade to v5.2, or a later
version, double click PA_Server.exe to
resume the upgrade process.
The installation wizard has detected that
an earlier version (pre-5.2) of P9000
Performance Advisor is installed on the
management station. For the installation to
proceed, the current installed version
should be v5.2 or later.
Earlier version of
P9000 Performance
Advisor already
exists on this
management
station.
Error messages46