HP StorageWorks P9000 Performance Advisor Software v5.4 Troubleshooting and FAQs Guide (T1789-96336, April 2012)

The following line is used to specify where the SMTP server(s) are located.
A server is specified by its name followed by its port. There can be an arbitrary amount of these
pairs to try. They are used in the order they appear here. An even number of space-delimited tokens
are required in this string.
An example is: smtpserver.company.com 25
alternatesmtp.nonprofit.org 25
If you cannot ping it, the code cannot talk to it!
Add more pairs of servers and ports to achieve retries:
SMTP_Servers_And_Ports=server.domain1.company.com 25
server.domain2.company.com 25 server.domain3.company.com 25
The following entry specifies who the e-mail is said to be coming from:
SMTP_Mail_From=alarm_server@your_company.com
The following are the fixed and user-defined messages for the alarm descriptions.
CHIP_PCB_MP_Util_Fixed=Client/Host Interface Processor Utilization CHIP_PCB_MP_Util_User=Front
(Host) End Processor Utilization LDEV_Sequential_Reads_Fixed=Logical Device Sequential Reads
LDEV_Sequential_Reads_User=Drive partition Sequential Reads
LDEV_Sequential_Writes_Fixed=Logical Device Sequential Writes LDEV_Sequential_Writes_User=Drive
partition Sequential Writes LDEV_Random_Reads_Fixed=Logical Device Random Reads
LDEV_Random_Reads_User=Drive partition Random Reads LDEV_Random_Writes_Fixed=Logical
Device Random Writes LDEV_Random_Writes_User=Drive partition Random Writes
LDEV_Sequential_I_O_rates_Fixed=Logical Device Sequential Input/Output
LDEV_Sequential_I_O_rates_User=Drive partition Sequential I/O
LDEV_Random_I_O_rates_Fixed=Logical Device Random Input/Output
LDEV_Random_I_O_rates_User=Drive partition Random I/O ACP_PAIR_Utilization_Fixed=Array
Control Processor Utilization ACP_PAIR_Utilization_User=Back (Disk) End Processor Utilization
Entry
Table 8 Configuring SMTP_Rpt_Compress for reports
On Windows platforms:
C:\Program Files\Hewlett-Packard\xppa\hostagent\config\
paxp_service.properties
If installed in a different location, the path is as follows: <Installation drive>:\xppa\
hostagent\config\paxp_service.properties.
On UNIX platforms:
/opt/xppa/hostagent/config/paxp_service.properties
Common for both Windows and UNIX platforms:
C:\Program Files\Hewlett- Packard\xppa\hostagent\config\xpmgmtstati
onaddress.prp.
File
By default, this parameter is set to TRUE. Any PDF or RTF file type that you generate for a report
is attached as a compressed file in the email notification sent by P9000 Performance Advisor. To
receive a normal (uncompressed) report as an email attachment, set the SMTP_Rpt_Compress
to FALSE. Then, restart the HP StorageWorks P9000 Performance Advisor Tomcat service on your
management station. Any PDF or RTF file type that you generate for a report is provided as a
normal file attachment in the email notification sent by P9000 Performance Advisor.
Discus-
sion
Table 9 Configuring the e-mail (SMTP) courier on the web server for reports
...%HPSS_HOME%\pa\properties\serverparameters.properties
File
Each time a report is produced that has at least one e-mail recipient.
When
Read
Frequently Asked Questions90