HP XP P9000 Performance Advisor Software v5.5 Install Guide (T1789-96339, February 2013)

10 Modifying or repairing HP XP P9000 Performance
Advisor
After installing HP XP P9000 Performance Advisor or the host agents, modify the settings that you
selected during the installation.
Modifying HP XP P9000 Performance Advisor program features
You can modify the following HP XP P9000 Performance Advisor settings after installation:
• Selecting a different authentication method from the list
• Selecting or removing the HP XP P9000 Performance Advisor host agents and tools
For example, if you want to install a host agent that was not selected during the installation of HP
XP P9000 Performance Advisor, choose to modify the HP XP P9000 Performance Advisor settings.
To modify the current HP XP P9000 Performance Advisor program features:
1. Log on to your management station as a default administrator (administrator:administrator).
2. Insert the HP XP P9000 Performance Advisor installation disk 1 into the DVD drive. If the
installation wizard does not start automatically, run the PA_Server.exe file from the HP XP
P9000 Performance Advisor installation disk 1.
The Welcome installation window appears.
3. Click Next.
4. Select Modify as the Program Maintenance type and click Next.
5. Select the authentication type that you want to implement for HP XP P9000 Performance
Advisor users and click Next. For more information, see “Implementing the authentication
method” (page 52).
6. Select the program features that you want to install or remove, and click Next. For more
information, see “Selecting complete or custom installation method” (page 59).
7. Click Install on the Ready to Modify window.
The setup program transfers and removes application files (as appropriate) to, and from the
destination folder, and configures HP XP P9000 Performance Advisor. When prompted for
the second disk, insert the HP XP P9000 Performance Advisor installation disk 2 into the DVD
drive, and click OK to continue.
8. When the program features are modified, the Installation Complete window appears. Click
Finish to close the installation wizard.
Repairing HP XP P9000 Performance Advisor program features
To repair the current HP XP P9000 Performance Advisor program features:
1. Perform steps 1–3 mentioned for modifying HP XP P9000 Performance Advisor program
features (see “Modifying HP XP P9000 Performance Advisor program features” (page 110).
2. Select Repair as the Program Maintenance type, and click Next.
3. Click Install on the Ready to Repair window.
The setup program transfers and removes application files (as appropriate) to, and from the
destination folder, and configures HP XP P9000 Performance Advisor. When prompted for
the second disk, insert the HP XP P9000 Performance Advisor installation disk 2 into the DVD
drive, and click OK to continue.
4. When the repair is done, the Installation Complete window appears. Click Finish to close the
installation wizard.
110 Modifying or repairing HP XP P9000 Performance Advisor