HP XP P9000 Performance Advisor Software v5.5 Install Guide (T1789-96339, February 2013)

1. Enter the required server connection values. “RADIUS server connection settings” (page 58)
provides the description for each of the RADIUS fields.
NOTE: Among the following settings, only the server address and shared secret values must
be provided. The remaining values are pre-populated and should not be modified.
Figure 14 Configure RADIUS Authentication Settings installation window
Table 10 RADIUS server connection settings
DescriptionScreen elements
The network name or IP address of the RADIUS server
that will be used for authentication.
Server Address box
The port number to use for RADIUS authentication.
(Default value: 1812).
Port box
Choice of the method (CHAP or PAP) to use for RADIUS
authentication. (Default authentication method: PAP).
Authentication Method list
The shared secret to be used when communicating with
the RADIUS server for user authentication.
Shared Secret box
Confirm the shared secret to be used when
communicating with the RADIUS server for user
authentication.
Confirm Shared Secret box
58 Installing HP XP P9000 Performance Advisor