HP XP P9000 Performance Advisor Software v5.5 User Guide (T1789-96337, Februrary 2013)

IMPORTANT:
• The port type, such as Fibre, Ficon, Escon, or FCoE (applicable only for P9000 disk arrays)
is also displayed beside the port ID.
• Since, the CHIP/CHA and the ACP/DKA MPs are moved to the MP blades in the P9000 disk
arrays, their MP utilization metrics are not applicable for the P9000 disk arrays. For more
information, see “Viewing MP blade utilization for P9000 disk arrays” (page 191).
Viewing summary of an individual CHIP/CHA
Click an individual CHIP/CHA in either the CHA summary table or the CHIP/CHA summary table
to view its data. You can also do the following:
• Select an individual CHIP/CHA under the CHIP component node for an XP disk array
• Select an individual CHA under the CHA/DKA component node for a P9000 disk array
The following table describes the data for an individual CHIP/CHA. The Yes and No given under
For XP disk arrays and For P9000 disk arrays columns indicate whether that particular information
or metric is displayed for the XP or the P9000 disk array.
For P9000 disk arraysFor XP disk arraysIndividual CHIP/CHA data
Summary
NoYesThe number of associated ports
YesYesThe protocol used
The port type can be Fibre, Ficon, Escon,
or FCoE.
The port type can be Fibre, Ficon, or
Escon.
NoYesThe utilization percentage of each MP on
the selected CHIP/CHA
Click an individual MP utilization block
to view the corresponding utilization
graph in the Chart Work Area. By default,
the utilization data displayed is for the
last one hour. For more information on
charts and using chart options, see
“Plotting charts” (page 233).
YesYesThe average I/Os and throughput of data
in MB/s on all the ports in the selected
CHIP/CHA
Port Details
NoYesThe individual MPs on the selected
CHIP/CHA
Yes (the port IDs are directly displayed
under the selected CHA.
YesThe IDs of the associated ports on the
selected CHIP/CHA
YesYesThe maximum and minimum I/Os on
individual ports
YesYesThe maximum, minimum, and average
throughput of data in MB/s on individual
ports
Example:
The following image displays the CHA-1EU performance data for 53036, which belongs to the
P9500 Disk Array type.
186 Viewing XP and P9000 disk array components