HP XP P9000 Performance Advisor Software v5.5 User Guide (T1789-96337, Februrary 2013)

Figure 17 Continuous Access Sync
Figure 18 Continuous Access Async
Table 15 (page 201) describes the data displayed:
Table 15 Continuous access configuration data
DescriptionScreen element
Serial number of the primary XP or P9000 disk array
(primary data center).
Primary Array
LDEV configured as P-VOL on the primary data center.
Displays the LDEV number in cu:ldev format.
PVOL
Serial number of the secondary XP or P9000 disk array.Secondary Array
LDEV configured as S-VOL on the secondary data center.
Displays the LDEV number in cu:ldev format.
SVOL
Current replication link status of the P-VOL or S-VOL on the
selected XP or P9000 disk array. The replication link status
Pair Status
shown is corresponding to the continuous access
transactions happening on the selected XP or P9000 disk
array, and can be one of the following:
• SMPL
• COPY
• PAIRED
• Pair Suspend
• Pair Suspend Error
• Pair DUB
• Reverse Copy
Viewing continuous access data for P9000 disk arrays 201