HP XP P9000 Performance Advisor Software v5.5 User Guide (T1789-96337, Februrary 2013)

Plotting charts

You can select and plot charts for components in the LDEVs, Port, CLPR, and the RAID group tables.

To plot charts for the selected components and metrics:

1. On the Troubleshooting screen, select components for which you want to plot charts. The

components can belong to the LDEV, Port, CLPR, and the RAID Group tables.

While selecting the records, press the Shift key for the sequential selection of multiple

components or the Ctrl key for the random selection of multiple components.

2. Click Plot Chart in the respective tables, where you have selected the components. The Plot

Chart is enabled only when you select a component.

The Plot Chart dialog box appears with the list of supported metrics.

3. Select the check box for the metric, for which you want to view the performance graph of the

selected components and click OK.

HP XP P9000 Performance Advisor plots appropriate performance graphs in the Chart Work

Area. By default, the data points are plotted for the last one hour of the management station's

time. For more information on using charts and chart options, see “Plotting charts” (page 233).

NOTE: When you plot the average read or write response graph for an LDEV, HP XP P9000

Performance Advisor also displays a table that provides the duration and the corresponding date

when the load was high on the LDEV.