HP XP P9000 Performance Advisor Software v5.5 User Guide (T1789-96337, Februrary 2013)

• If you are collecting the performance data for the first time, it takes longer than usual for HP

XP P9000 Performance Advisor to collect the data. The subsequent performance data collection

is as per the time specified in the Frequency section.

• If you have performed a one-time configuration data collection and later the XP or the P9000

disk array configuration is modified, HP recommends that you perform a fresh configuration

data collection, so that the performance data collected is for the latest configuration.

Initially, when performance data collection is not yet configured for the XP and the P9000 disk

arrays, the following details are displayed in the Performance Collection table, under the

Performance Collection tab:

DescriptionScreen elements

Displays the DKC number of the XP or the P9000 disk

array.

Array

Displays the system name of the host.Host ID

Displays the port that is configured to communicate data

between the command device on an XP or a P9000 disk

array and the associated host.

Port

Displays the LDEV ID of the LDEV that is configured as a

command device.

Cmddev

Displays the device file for the command device.DeviceFile

No schedule name.Schedule Name

Displays 0,0,0Frequency (DKC, RG, Port)

Displays

Enabled

Displays the View link, clicking which displays empty

schedule, as the schedule is not yet created.

Components