HP XP P9000 Performance Advisor Software v6.0 Command-line User Interface Reference Guide

dkch [-d<delim>] [-L] [-hr] [-ms<URL>] [-auth <user:passwd>] -dkc <serial
#> [-st <start time> -et <end time>] [-?]
Supported disk array types
XP and P9000 disk arrays.
NOTE: The output for this command may be different for XP and P9000 disk arrays. For more
information, see “DKCH” (page 56).
Description
Displays the CHIP and ACP utilization history of a given array for a given time range.
Switches
Required. Specifies the array serial number.–dkc <serial#>
Specifies the delimiter for delimited output. There is no space between -d and the delimiter
character.
–d<delim>
Specifies the labeled and delimited output data.–L
Displays data in a readable format.–hr
Specifies the address of a management station in the format <http://
path.to.managementstation:<port>> or <https://
path.to.managementstation>.
–ms <URL>
Specifies a user name and password pair in the format user name:password.–-auth <user:passwd>
Specifies the start time in the format mm.dd.yyyy hh:mm:ss.—st <start time>
Specifies the end time in the format mm.dd.yyyy hh:mm:ss.–et <end time>
Prints the usage statement.–?
NOTE: If no start and end time is specified, only the most recent 10 records are retrieved from
the management station.
Examples
dkch -dkc 10055 -hr
dkch -L -dkc 30143
dkch -dkc 10055 —L
LUNH
Syntax
lunh [-d<delim>] [-L] [-hr] [-ms <URL>] [-auth <user:passwd>] -ha <host
ID>[-mr <maxRecords>] [-rg <raidGroup>] [-chp <chpPort>] [-acp <acpPair>]
[-dkc <serial #>] [-dver <xxxxxx>] [-?] [-luse] [-ugrp]
Supported disk array types
XP and P9000 disk arrays.
NOTE: The output for this command may be different for XP and P9000 disk arrays. For more
information, see the sample “LUNH” (page 61) report.
Description
Displays logical unit snapshot data, such as LUN ID, device file, emulation, Snapshot ID, CHIP
port ID, and ACP pair ID. The output of this command is sorted by the array ID.
LUNH 19