HP XP P9000 Performance Advisor Software v6.0 Command-line User Interface Reference Guide

Displays data in a readable format.–hr

Prints the usage statement.–?

Examples

dbconfig -list –hr

dbconfig -list -L

dbconfig –list

AGGREGATE

Syntax

aggregate [-items <item list>] [-L] [-hr] [-a] [-st<MM.DD.YYYY hh:mm:ss>]

[-et<MM.DD.YYYY hh:mm:ss>] [-?]

The format to list items for the P9000 Thin Provisioning metrics for the aggregate command is:

<array_sl_no>:<THP Pool ID>

The format to list items for the P9000 Snapshot metrics for the aggregate command is:

<array_sl_no>:<Snapshot Pool ID>

The format to list the average and maximum values for the samples in the time period specified by

the –st and –et values is as follows:

aggregate [-a] [-st<MM.DD.YYYY hh:mm:ss>] [-et<MM.DD.YYYY hh:mm:ss>]

Supported disk array types

XP and P9000 disk arrays

Description

Displays the performance data of a given metric for a specified time interval. Based on the metric

used, information can be requested for an array, RAID Group, or LDEV.

IMPORTANT: Since, the ACP/DKA MPs are moved to the MP blades in the P9000 disk arrays,

their MP utilization metrics are not applicable for the P9000 disk arrays and the data for the same

is not displayed.

Required. Specify a CSV list of DKCs, metrics, and items on the DKC for which you want the

aggregated data.

It uses the form Metric:dkc serial:itemlist, or Metric:User Defined Group.

–items<item list>

Item list: A list of LDEVs, ports, ACP Pairs, RAID Groups, or ranges of each

(except for RAID Groups) separated by a "+".

Ranges are in the form lowitem-highitem separated by a "-".

Items must be entered in their string form (case insensitive, no "-" within the port).

For example:

ldev_io_total:20031:1:f4-1:f9+1:fc

port_io_max:10033:CL1E

The RAID Groups format is: <array_sl_no>:<raid group>

For example: raidgrp_io_total:10278:1-1

Specify the lower bound on time.–st <MM.DD.YYYY

hh:mm:ss>

Specify the upper bound on time.–et <MM.DD.YYYY

hh:mm:ss>

32 CLUI commands