HP XP P9000 Performance Advisor Software v6.0 Command-line User Interface Reference Guide

Switches
Interactive mode. When prompted, provide the URL of the management station.–i
Specify the report user name and password pair. The default value for this entry is
paxp:xparray.
–rauth <report
username:password>
Specify the management station ID or IP address. The default value for this entry is
localhost.
–ms <management
station>
Specify the configuration user name and password pair.
The default value for this entry is confmonxp:redstar.
–cauth <config
username:password>
In the interactive mode, pressing “Enter” for each entry retains the current or default values.
Example
proputility -i
THP
Syntax
thp -dkc <serial #> [-pid <thp/smart pool id>] [-auth <user:passwd>]
[-ms <URL>] [-L] [-d<char>] [-hr] [-?] [-pf <password file>]
Supported disk array types
XP and P9000 disk arrays
Description
Enables you to obtain Pool occupancy and Pool capacity metrics for the ThP and smart pools.
Switches
Required. Specify the array serial number.–dkc <serial #>
Specify the THP pool ID for which you want output displayed.–pid <thp pool id>
Specify the address of a management station in the format <http://
path.to.managementstation:<port>> or <https://
path.to.managementstation>.
–ms <URL>
Specify a user name and password pair in the format user name:password.–auth <user:passwd>
Can be used in place of -auth.
NOTE: The password file must be created using the encrypt command only.
–pf <password file>
Specify the delimiter for delimited display.–d <char>
Displays readable output.–hr
Prints the usage statement.–?
NOTE:
• The -st and –et options are supported with the –pid option only. The array serial number
and –dkc are required elements.
• The thp command takes ThP and smart pool id as input and displays values for the configured
ThP and smart pool performance and capacity metrics.
Examples
thp -dkc 53036
thp -dkc 53036 -hr
thp -dkc 53036 -pid 25
thp -dkc 53036 -pid 25 -hr
THP 39