HP XP P9000 Performance Advisor Software v6.0 Command-line User Interface Reference Guide

thp -dkc 53036 -pid 0 -hr

SNAPSHOT

Syntax

snapshot -dkc <serial #> [-pid <snapshot pool id>] [-auth <user:passwd>]

[-ms <URL>] [-L] [-d<char>] [-hr] [-?] [-pf <password file>]

Supported disk array types

XP and P9000 disk arrays

Description

Enables you to obtain Snapshot pool related information. This command provides the Snapshot

pool occupancy value in percentage. This command does not display the snapshot pools unless

snapshot pool is associated with any Virtual volume.

Switches

Required. Specify the array serial number.–dkc <serial #>

Specify the address of a management station in the format <http://

path.to.managementstation:<port>> or <https://

path.to.managementstation>.

–ms <URL>

Specify a user name and password pair in the format user name:password.–auth

<user:passwd>

Can be used in place of –auth.

NOTE: The password file must be created using the encrypt command only.

–pf <password file>

Specify the delimiter for delimited display.–d

Displays data in a readable format.–hr

Prints the usage statement.–?

NOTE: The -st and –et options are supported with the –pid option only.

Examples

snapshot -dkc <array sn no> -hr

snapshot -dkc <array sn no> -L

snapshot -dkc <array sn no> -pid 1

snapshot -dkc <array sn no> -pid 1 st 02.23.2006 16:00:00 et 02.23.2006

16:15:00

JNL

Syntax

jnl -dkc <serial #> [-jid <journal pool id>] [-auth <user:passwd>] [-ms

<URL>] [-L] [-resp] [-d <char>] [-hr] [-?] [-pf <password file>] [-st

<MM.DD.YYYY hh:mm:ss>] [-et <MM.DD.YYYY hh:mm:ss>]

Supported disk array types

XP and P9000 disk arrays

Description

Enables you to obtain Continuous Access Journal related information. This command provides the

following Continuous Access Journal information:

JID — Displays the journal group ID

MU — Displays the mirror descriptions on journal group

40 CLUI commands