HP XP P9000 Performance Advisor Software v6.0 Command-line User Interface Reference Guide

The LDEV ID at the external array.E-LDEV
The Cache Partitioning ID.CLPR
Sample usage and output:
...,E-Port list, E-Seq, E-LDEV, CLPR
..., -1, -1, -1, -1
..., CL1C, 20074, 0:90, CLPR0
..., CL1C, 20074, 0:91, CLPR0
..., CL1C, 20074, 0:92, CLPR1
..., CL1C, 20074, 0:93, CLPR1
..., CL1B CL1C, 20074, 0:94, CLPR2
..., -1, -1, -1, CLPR3
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
The following is the portion of data in the output file ldev_output.txt,
which contains the port attribute and external array serial number. The
information is appended to the end of each record. The E-Seq list could
have one or more array serial numbers because one Ext-Lun Initiator can
connect to multiple arrays in a SAM. If the -hr option is not used, the
Port ID is in integer format.
..., Port Type, E-Seq list
..., Fibre (Ext-Lun Initiator), 10099 20099
..., Fibre (Ext-Lun Initiator), 10099 20099
..., Fibre (Ext-Lun Initiator), 10088
..., Fibre (Normal), -1
..., Fibre (CV Initiator), -1
..., Fibre, -1
..., -, -1
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
The following is the portion of data in the output file ldev_output.txt,
which contains the CLPR configuration data and metrics. All units for
Cache size are in MB. If the -hr option is not used, the CLPR is in integer
format.
Disk Array Serial Number, CLPR, Date, Cache Size (MB), Write Pending (MB),
Sidefile Usage (MB), Read Hits
10033, CLPR0, 2003-05-19 13:01:00.103, 8000, 96, 23, 8778
10033, CLPR1, 2003-05-19 13:01:00.103, 64000, 76, 23, 870
10033, CLPR2, 2003-05-19 13:01:00.103, 8000, 67, 23, 86
10033, CLPR3, 2003-05-19 13:01:00.103, 16000, 45, 12, 778
10033, CLPR4, 2003-05-19 13:01:00.103, 8000, 0, 0, 0
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
The following is the portion of data in the output file mp_output.txt,
which contains the MP blade and processors utilization data and metrics. All units for
the MP blade and processor utilization are in percentage (measured on a scale of 1 - 100%).
DKC Serial Number MP Blade ID MP 0 Utilization MP 1 Utilization MP 2 Utilization
MP 3 Utilization Average Utilization Time Open-target Busy Time System Busy Time
53036 MPB-1MA 0 (25.0%) 1 (25.0%) 2 (25.0%) 3 (25.0%) 4 15:00.1 0 3
53036 MPB-1MB 4 (56.521%) 5 (14.492%) 6 (14.49%) 7 (14.43%) 17.25 15:00.1
53036 MPB-2MC 8 (0.0%) 9 (0.0%) 10 (0.0%) 11 (0.0%) 0 15:00.1
53036 MPB-2MD 12 (0.0%) 13 (0.0%) 14 (0.0%) 15 (0.0%) 0 15:00.1
53036 MPB-1ME 16 (0.0%) 17 (0.0%) 18 (0.0%) 19 (0.0%) 0 15:00.1
53036 MPB-1MF 20 (0.0%) 21 (0.0%) 22 (0.0%) 23 (0.0%) 0 15:00.1
53036 MPB-2MG 24 (0.0%) 25 (0.0%) 26 (0.0%) 27 (0.0%) 0 15:00.1
53036 MPB-2MH 28 (0.0%) 29 (0.0%) 30 (0.0%) 31 (0.0%) 0 15:00.1
53036 MPB-1MA 0 (25.0%) 1 (25.0%) 2 (25.0%) 3 (25.0%) 4 30:00.1 0 3
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
exportdb -dkc 10055 -st 09.14.2006 12:00:00 -et 09.14.2006 13:00:00 -dver 020000
-file test.csv -resp all
Data records exported: 12
Data record export complete.
-resp write Max Write Response Time(msec)-valid for last 30 secs
-resp read Max Read Response Time(msec)-valid for last 30 secs
-resp all Max Write Response Time(msec)-valid for last 30 secs and
Max Read Response Time(msec)-valid for last 30 secs
The following is the portion of data in the output file ldev_xxx.txt (where
80 Sample outputs