HP XP P9000 Performance Advisor Software v6.0 User Guide

NOTE:
• For the Raid Group, the Host Group branch is traversed first, followed by the Pool branch,
Back-end, and finally the Drive Types branch.
• You can search for External Raid Groups as well by selecting Raid Group from the component
drop-down list and querying for a specific External Raid Group.
• When searching for concatenated Raid groups, you should enter a part of Raid group name
and not the entire name. For example: If you want to search for concatenated Raid Group
"1-1 1-2", then enter either 1-1 or 1-2 in the search box, and click Find Next.
• For the Port, the Host Group branch is traversed first followed by the Front-end branch.
• For Host Group, the Host group is highlighted first in the host group branch followed by the
Pools branch.
◦ For performing search in the Host Group, you have to include the entire host or partial
host group name. If you want to search for Host Group PA-CVXPt2, then you have to
type the entire name or partial name, considering the case sensitivity to navigate in host
groups and the Pools branches.
• Pools are traversed in only pool and snap pool branches.
• When searching for LDEVs in the Host Group branches, only the LDEVs present in HostGroup
-> Ldevs branch is highlighted. The LDEVs present in HostGroup ->RG ->Physical Ldevs branch
and HostGroup ->RG ->Pool Ldevs branch is not traversed.
• Filtering is not supported for sub nodes that are under HostGroup->LDEVs->PVol, that is, filtering
is not supported for the components that are in S-Vols , S-Vols ->Pool-ID, S-Vols -> Pool-ID ->
Ldevs, S-Vols ->Pool-ID -> Ldevs -> RGs.
128 Configuring alarms and managing events