HP XP P9000 Performance Advisor Software v6.0 User Guide

Figure 24 Port summary
DescriptionScreen elements
Displays the port ID for the CHP port. Provides the option
to view information associated with a particular port or with
all ports.
CHP Port ID
Displays the SLPR with which the RAID group is associated.
NOTE: SLPR does not exist in the P9000 disk arrays. So,
the SLPR-related data is displayed only for the XP disk arrays.
SLPR
Displays the SLPR group ID.
NOTE: SLPR does not exist in the P9000 disk arrays. So,
the SLPR group ID is displayed only for the XP disk arrays.
SLPR Name
Displays the port type, such as Fibre or FCoE (applicable
only for P9000 disk arrays) for the port ID.
Port Type
Displays the Ext-Lun provider's serial number for the array.E-seq(s)
Displays the maximum frontend I/Os on the port.Max IO/s
Displays the average of the total frontend I/Os.Avg IO/s
Displays the minimum frontend I/Os on the port.Min IO/s
Displays the maximum frontend throughput in MB/s.Max MB/s
Displays the minimum frontend throughput in MB/s.Min MB/s
Displays the average frontend throughput in MB/s.Avg MB/s
Viewing 90th and 95th percentile values for Continuous Access ports
The write data throughputs frequently display transient peaks beyond the average performance.
Sizing to these peaks can lead to enormous bandwidth provisioning and cost. Percentiles are an
Viewing 90th and 95th percentile values for Continuous Access ports 211