HP XP P9000 Performance Advisor Software v6.0 User Guide

Filter records based on existing selection
This type of filter is applicable when you want to view the LDEV data based on your selection from
an existing filter criteria. Following is an example on filtering records in the RAID Group list:
1. Click the RG list.
2. In the RAID Group filter that appears, select the check box for those RAID groups, for which
you want to view the corresponding LDEV data.
3. Click OK.
The LDEV table displays only those records that match the specified RAID group IDs.
Filter records for values greater or lesser than the specified value
This type of filter is applicable when you want to view performance values of LDEVs based on the
following combination, where you select from an existing filter criteria and also specify a value.
Following is an example on filtering records in the LDEV IO/s list:
1. Click the LDEV IO list.
2. Select one of the following based on your requirement and provide the value in the adjacent
text box:
< (greater than the specified value)
> (less than the specified value)
<= (greater than or equal to the specified value)
>= (less than or equal to the specified value)
3. Click OK.
The data in the LDEV table is filtered based on the filter criteria and values matching the
specified criteria are displayed.
The LDEV table displays only those records that match the specified filter criteria. In the above
image, all the LDEV records whose LDEV I/O per second value is greater than eight are displayed
in the LDEV table.
Viewing LDEV data 223