HP XP P9000 Performance Advisor Software v6.0 User Guide

DescriptionScreen elements
Displays the available license capacity.
• If you select an XP disk array record, this column
always displays the Installed License Capacity value.
• If you select a P9000 disk array record whose usable
capacity is monitored using only a Permanent license,
this column displays the Installed License Capacity
value.
• In case of Meter based Term licenses:
1. If you select a P9000 disk array record for which
both the Permanent license and TB-Days of Meter
based Term license are installed, and if the
TB-Days are currently active, this column displays
the Permanent licensed capacity and the
remaining installed TB-Days.
2. If the installed TB-Days are completely used and
additional TB-Days are not available, this column
displays the Permanent licensed capacity and
0TB-Days of Meter based Term license.
3. If the installed TB-Days are dormant, this column
displays the Permanent licensed capacity and the
TB-Days that you installed. If 50TB Permanent
licensed capacity is active and you installed
10TB-Days that are dormant, the following are
displayed:
◦ 50TB
◦ 10TB-Days
NOTE: In any of the preceding three cases (1,2
and 3), if you remove the Meter based Term license,
only the Permanent license capacity is displayed.
Licenses Available
34 Managing licenses for XP and P9000 disk arrays