HP XP P9000 Performance Advisor Software v6.0 User Guide

DescriptionScreen elements
Displays the DKC number and the user-friendly name of
the XP or the P9000 disk array.
Array
Displays the system name of the host.Host ID
Displays the port that is configured to communicate data
between the command device (on an XP or a P9000 disk
array) and the associated host agent.
Port
Displays the ID of the LDEV that is configured as a
command device.
Cmddev
Displays the device file for the command device.DeviceFile
Displays —, if the configuration collection is not yet initiated
for an XP or a P9000 disk array. After the configuration
Last Collection TimeStamp
data collection is initiated, the Last Collection displays the
date and time when HP XP P9000 Performance Advisor
receives the complete configuration data from the XP or
the P9000 disk array.
Displays —, if configuration collection is not yet scheduled
or a one-time configuration data collection is performed
Frequency
on the XP or the P9000 disk array. The schedule type and
duration (date and time stamp) are displayed under
Frequency, only if a configuration data collection is
scheduled.
Displays the following icons based on the status of the
configuration data collection that you initiated. Hover the
Collection Status
pointing device over the status icon to know the status,
which is displayed as a tool tip:
• Displays , if configuration data collection (one-time
or scheduled) is not yet initiated.
• Displays , if configuration data collection (one-time
or scheduled) is complete without any errors.
• Displays , if configuration data collection (one-time
or scheduled) has failed due to an error. The reason for
the error is displayed as a tool tip.
• Displays , if configuration data collection (one-time
or scheduled) is in progress.
Click Refresh to perform a manual refresh of the Configuration Collection table.
CAUTION: Ensure that the date and time on the management station and the hosts are
synchronized with the local time zone to receive accurate configuration data. This condition is also
applicable for the client systems that use the IE browser to access HP XP P9000 Performance
Advisor on a management station, and the systems that have the CLUI software installed.
Collecting configuration data 49