XPWatch and XPSketch Reference guide for HP XP P9000 Performance Advisor

The Array menu also displays the HP XP P9000Watch version. You can also view the HP XP
P9000Watch version using the following command in the command prompt:
XPWatch.exe -v
To select an array, enter the number (Num) corresponding to it. For example, to select a P9000
disk array that belongs to the P9500 disk array model, enter 3.
NOTE: You can select only one array at a time.
Table 5 lists the fields of the Array menu.
Table 5 Array menu—fields
DescriptionScreen field
Selection number.Num
Serial number of the array.Serial
Type indicates the array model. Supports P9000 disk array
models such as, P9500 and XP disk array models such as,
Type
XP1024/48, XP10000, XP12000, XP20000, and
XP24000.
Sync/Async Metrics
The Sync/Async Metrics screen lists all the configured P-VOLs.
Figure 5 Sync/Async Metrics
NOTE: The Sync/Async Metrics are available only in the Interactive mode.
The Sync/Async Metrics provides configuration information for each P-VOL and S-VOL which
includes data displayed in the following table:
DescriptionScreen field
Selection Number.Num
S against a P-VOL or S-VOL record indicates that the
particular record is selected.
Sel
Serial number of the XP or P9000 disk array.Pri Ser#
LDEV configured as P-VOL or S-VOL on the selected disk
array (primary data center). Displays the LDEV number in
cu:ldev format.
Ldev
Type of the LDEV, can be P-VOL or S-VOL.Type
CLPR that manages cache for the P-VOL or S-VOL.CLPR
RAID group to which the P-VOL or S-VOL belongs.Rg
RAID classification for the RAID group.RAID
Menus 21