XPWatch and XPSketch Reference guide for HP XP P9000 Performance Advisor

Table 6 Host Groups — fields
DescriptionScreen field
Selection number.Num
User-friendly names given to the hosts.Nickname
Displays the host group name.Host Group Name
The port used by the XP or P9000 disk array to communicate
with the host.
Ports
Viewing Host Groups
To view the host groups connected to an array, perform the following steps:
1. Start HP XP P9000Watch. The Array menu appears.
2. Select the array whose performance you want to monitor and press the Enter key. The list of
host groups connected to the array appears.
Selecting Host Groups
Select the host whose performance data you want to monitor.
To select a host group, enter the number corresponding to it. For example, to select HWP10 and
Kalam host groups (see figure Available Host Groups), perform the following steps:
1. Enter 111 and press the Enter key.
The HWP10 host group is selected as shown in the following figure.
NOTE: The selected host group is highlighted in green.
Figure 8 shows one host group selected from the list of available host groups.
26 Working with HP XP P9000Watch menus and commands