Hitachi Dynamic Link Manager Software Users Guide for Linux

¢
Store the license key file (*.plk) in the /var/tmp directory, under the
name hdlm_license.
/var/tmp/hdlm_license
¢
Execute the following commands to create the license key file
(dlm.lic_key) in the /etc/opt/DynamicLinkManager directory.
# mkdir /etc/opt/DynamicLinkManager
# echo "license-key" >
/etc/opt/DynamicLinkManager/dlm.lic_key
3. Insert the DVD-ROM and mount it.
If the DVD-ROM was not automatically mounted, execute the mount
command to mount the DVD-ROM to the fixed mount point.
The following shows an example of command execution when the mount
point is /media/cdrom:
# mount /dev/cdrom /media/cdrom
The following table lists the fixed mount points for each distribution.
Table 3-63 Mount Point for Each Distribution
Distribution Mount point
Red Hat Enterprise Linux
AS4/ES4
/media/cdrecorder
Red Hat Enterprise Linux 5
Red Hat Enterprise Linux 6
/media/cdrom
SUSE LINUX Enterprise Server
/media/cdrom
If the DVD-ROM is automatically mounted:
/media/ media-volume-id
#
Note 1
HDLM cannot be installed if the DVD-ROM is mounted to a mount
point other than the above.
Note 2
To copy the DVD-ROM to a directory, and then install HDLM from that
directory, copy the DVD-ROM to a directory with the same name as
the mount point noted above. If the file permissions or the directory
structure differs, HDLM cannot be installed.
#
This refers to the volume name for the CD-ROM or other media,
formatted for ISO-9660 file systems. Use the volname command to
check media-volume-id.
The following shows an execution example for when media-volume-id
is VOL01234.
Creating an HDLM Environment
3-107
Hitachi Dynamic Link Manager (for Linux®) User Guide