Hitachi Dynamic Link Manager Software Users Guide for Linux

5. Perform the installation.
Execute installux.sh or the installhdlm utility stored on the HDLM
DVD-ROM to start installation.
The following shows an installation execution example for when the DVD-
ROM mount point is /media/cdrom.
¢
When executing installux.sh
# /media/cdrom/installux.sh
¢
When executing the installhdlm utility
# /media/cdrom/HDLM_Linux/installhdlm
6. The KAPL09093-I message is displayed to confirm that you want to
perform an upgrade installation. Check the HDLM version, and if it is
correct, enter y.
7. Make sure that HDLM is installed.
Execute the following command to display detailed information about the
installed package.
# rpm -qi HDLM
Name : HDLM
Version : x.x.x.x.xxx
Release : xx
:
If HDLM Version is x.x.x.x.xxx, the installed version of HDLM is correct.
x.x.x.x.xxx indicates the HDLM version that was installed.
8. When you want to set the HDLM driver options, run the dlmsetopt utility
for setting HDLM driver option.
For details on this utility, see
dlmsetopt Utility for Setting HDLM Driver
Options on page 7-37.
If you performed this step, go to step 11.
9. When you want to install HDLM without restarting the host, go to step 10.
When you want to install HDLM with restarting the host, then go to step
11.
10. Execute the dlmstart utility for starting HDLM.
For details, see
dlmstart Utility for Starting HDLM on page 7-40.
11. Add /opt/DynamicLinkManager/bin in the environment variable PATH in
the environment setup file for the shell used by the root user.
Add the following code to the PATH environment variable in the
environment settings file for the root user. This makes executing the
HDLM commands and HDLM utilities easier.
When the BourneAgain shell or Korn shell is used:
PATH=$PATH:/opt/DynamicLinkManager/bin ; export PATH
When the C shell is used:
Creating an HDLM Environment
3-115
Hitachi Dynamic Link Manager (for Linux®) User Guide