Hitachi Dynamic Link Manager Software Users Guide for Linux

After:

For details on which HDLM device correspond to which SCSI device, see

Displaying Corresponding Information About an HDLM Device, SCSI

Device, and LDEV on page 4-38.

5. Execute the following command to enable the settings in the hardware

configuration file.

# virsh define /etc/libvirt/qemu/domK.xml

6. Start the guest OS.

For details on how to start the guest OS, see the OS documentation.

Canceling the Settings for LVM2

This section explains how to change from an environment where HDLM

devices are used as LVM physical volumes, to an environment where SCSI

devices are used as LVM physical volumes.

This section provides the procedure for moving a logical volume on an HDLM

device in a multipath configuration to a SCSI device in a single path

configuration when using LVM2.

To create the environment shown in

Figure 3-23 Device Configuration When a

Logical Volume on an HDLM Device Is Moved to a SCSI Device on page

3-213, carry out the procedure below. To remove HDLM, carry out the steps

before the removal.

3-212

Creating an HDLM Environment

Hitachi Dynamic Link Manager (for Linux®) User Guide