Hitachi Dynamic Link Manager Software Users Guide for Linux

defaults 1 2
:
After:
:
#/dev/sddlmca2 / ext4
defaults 1 1
LABEL=/ / ext4
defaults 1 1
#/dev/sddlmca1 /boot ext4
defaults 1 2
LABEL=/boot /boot ext4
defaults 1 2
:
¢
If UUID is used:
Before:
:
/dev/sddlmca2 / ext4
defaults 1 1
/dev/sddlmca1 /boot ext4
defaults 1 2
:
After:
:
#/dev/sddlmca2 / ext4
defaults 1 1
UUID=198c6ab4-3aa1-49d7-9d40-56b999101186 / ext4
defaults 1 1
#/dev/sddlmca1 /boot ext4
defaults 1 2
UUID=5d3a3935-26ee-4d69-b86e-70108aa2c306 /boot ext4
defaults 1 2
:
6. Copy the configuration contained in the boot loader configuration file,
which was used for startup from the HDLM device.
The following shows an example configuration. Note that option in the
example represents an option that can be specified to suit the user
environment.
¢
When GRUB is used as the boot loader with Xen kernels:
For details on Xen kernels, see
Table 3-61 Xen Hypervisor Operating
Environments Supported by HDLM on page 3-93.
:
:
title XEN
root (hd0,1)
kernel /boot/xen.gz
module /boot/vmlinuz-2.6.16.60-0.21-xen vga=0x31a
splash=silent showopts
module /boot/initrd-2.6.16.60-0.21-xen.hdlm
¢
When GRUB is used as the boot loader with non-Xen kernels:
For details on kernels supported by HDLM, see Hosts and OSs
Supported by HDLM on page 3-3.
4-14
HDLM Operation
Hitachi Dynamic Link Manager (for Linux®) User Guide