Hitachi Dynamic Link Manager Software Users Guide for Linux

Figure 4-2 Example of Editing /etc/lvm/lvm.conf file
Comment out the existing filter and types lines, and add the shaded
lines in the figure.
In addition, set md_component_detection to its original value before
installation.
9. Edit the boot loader configuration file so that the OS will start with a SCSI
device specified.
Edit the boot loader configuration file as shown in
Figure 4-3 Example of
Editing /etc/grub.conf file on page 4-23, Figure 4-4 Example of Editing /
boot/grub/menu.lst file (When using a kernel that supports Xen) on page
4-24, and Figure 4-5 Example of Editing /etc/elilo.conf file on page 4-24.
If you are using SUSE LINUX Enterprise Server, check the /boot/grub/
menu.lst file instead of the /etc/grub.conf file.
Examples of editing the configuration file are shown below. See the
example for the boot loader you are using.
The detailed procedure is explained in steps 10 to 16.
Figure 4-3 Example of Editing /etc/grub.conf file
Edit the shaded portion.
HDLM Operation
4-23
Hitachi Dynamic Link Manager (for Linux®) User Guide