Hitachi Dynamic Link Manager Software Users Guide for Linux

Note on adding a Hitachi Compute Blade I/O drawer
When you restart the host after adding a Hitachi Compute Blade I/O drawer
#
,
and if you execute the HDLM-configuration definition utility (dlmcfgmgr -v), a
hyphen (-) might be displayed in the Device column of the execution results.
# dlmcfgmgr -v
HDevName Management Device Host Channel Target
Lun
/dev/sddlmaa configured /dev/sde 2 0 0
1
- 0 0 0
0
/dev/sda 1 0 0
0
/dev/sddlmab configured - 0 0 0
1
/dev/sdf 2 0 0
2
/dev/sdb 1 0 0
1
KAPL10302-I /sbin/dlmcfgmgr completed normally.
To change to a status that does not display a hyphen, execute the dlmcfgmgr
utility with the -u parameter specified.
For details on the dlmcfgmgr utility, see dlmcfgmgr Utility for Managing the
HDLM Configuration on page 7-22.
#
An I/O drawer is considered added in either of the following situations:
¢
When adding an I/O drawer to the host
¢
When adding an HBA to an I/O drawer that is already connected to
the host
HDLM Operation
4-75
Hitachi Dynamic Link Manager (for Linux®) User Guide