Hitachi Dynamic Link Manager Software Users Guide for Linux

Table 6-3 Values of the Error Log Collection Levels
Value Description
0
Collects no error log.
1
Collects error information for the Error or higher level.
2
Collects error information for the Warning or higher level.
3
Collects error information for the Information or higher level.
4
Collects error information for the Information (including maintenance
information) or higher level.
The higher the error log collection level value, the more log information
will be output. As the amount of log information that is output increases,
the amount of time before existing information will be overwritten
becomes shorter.
Example
# /opt/DynamicLinkManager/bin/dlnkmgr set -ellv 1
KAPL01049-I Would you like to execute the operation?
Operation name = set [y/n]: y
KAPL01001-I The HDLM command completed normally. Operation
name = set, completion time = yyyy/mm/dd hh:mm:ss
#
-elfs error-log-file-size
Specify a value from 100 to 2,000,000 (in KB) for the size of the error log
files (dlmmgrn.log (n indicates a file number from 1 to 16)). The specified
files size is applied to HDLM manager logs.
By specifying both the error log file size and the number of error log files,
you can collect up to 32,000,000 KB (approximately 30 GB) of error logs
in total.
When the size of all the log files in a log file group reaches their maximum
value, the new log data will overwrite the existing log data, starting with
the oldest log data.
-elfn number-of-error-log-files
Specify the number of error log files (dlmmgrn.log (n indicates a file
number from 1 to 16)). Specify a value from 2 to 16.
By specifying both the error log file size and the number of error log files,
you can collect up to 32,000,000 KB (approximately 30 GB) of error logs
in total.
-systflv trace-level
Specify the trace output level.
Log files for which the trace level can be set are hdlmtrn.log (where n is
a value from 1 to 64).
6-18
Command Reference
Hitachi Dynamic Link Manager (for Linux®) User Guide