Hitachi Dynamic Link Manager Software Users Guide for Linux

Setting
Available operation Result of operation
AFB IEM
Set AFB to off. The operations of AFB and IEM do not
change.
off
Set AFB to on. AFB is enabled.
Set AFB to off. The operations of AFB and IEM do not
change.
Legend:
AFB: Automatic failback
IEM: Intermittent error monitoring
#1
When this condition is not satisfied, the KAPL01080-W message is output
and an error occurs. The status of intermittent error monitoring does not
change.
#2
Because automatic failback is off, intermittent error monitoring is
disabled.
Example
The following example shows how to monitor for intermittent errors.
# /opt/DynamicLinkManager/bin/dlnkmgr set -iem on -intvl 20 -
iemnum 2
KAPL01049-I Would you like to execute the operation?
Operation name = set [y/n]: y
KAPL01001-I The HDLM command completed normally. Operation
name = set, completion time = yyyy/mm/dd hh:mm:ss
#
-lic
Specify this option for when a license is updated. The HDLM license is
provided via a license key or license key file. A license key file is a file
that stores the HDLM license key.
If a license key file is provided:
Store the license key file named hdlm_license directly under /var/
tmp, and then execute the set -lic operation. A message confirming
that the license key has been registered is displayed, depending on
the license key type defined in the license key file. When a temporary
license key or emergency license key has been registered, the
expiration period is displayed (KAPL01071-I, KAPL01072-I).
If a license key is provided:
When the set -lic operation is executed, a message (KAPL01068-I)
asking the user to enter a license key appears. Enter the license key.
A message confirming that the license key has been registered is
Command Reference
6-25
Hitachi Dynamic Link Manager (for Linux®) User Guide