Hitachi Dynamic Link Manager Software Users Guide for Linux

If the -pstv parameter is specified, information about the physical
storage system is displayed. If the -vstv parameter is specified,
information about the storage system recognized by the operating
system is displayed. If neither parameter is specified, information is
displayed according to the value specified in the -pstv parameter of
set operations.
For information about the items that are displayed differently
depending on the specified -pstv and -vstv parameters, see
Table
6-10 Display items for which the display results of the view operation
differ depending on the -pstv parameter specification on page 6-29 in
Parameters on page 6-16.
-t
Omits the title for each information item.
Example
The following example shows how to display a summary of LU
information (without selecting items to be displayed):
# /opt/DynamicLinkManager/bin/dlnkmgr view -lu -c
Product S/N LUs iLU HDevName Paths OnlinePaths
9500V 0115 5 0000 sddlmac 4 4
0001 sddlmad 4 4
0002 sddlmae 4 4
0003 sddlmaa 4 4
0004 sddlmab 4 4
KAPL01001-I The HDLM command completed normally. Operation
name = view, completion time = yyyy/mm/dd hh:mm:ss
#
To display a summary of LU information (by selecting items to be
displayed)
-lu -c -item
The items displayed when the -item option is added to the -lu -c
options.
When the value of the -item parameter is omitted, all the items that can
be displayed are displayed.
The following table lists the correspondence between the display items
that can be added by using the -item parameter and the parameter
values that can be specified after the -item parameter.
Table 6-17 Correspondence between the item displayed by the
dlnkmgr view -lu -c -item command and the value of the -item
parameter
Item displayed by the dlnkmgr view -
lu -c -item command
Value specified after the -item
parameter
SLPR slpr
Command Reference
6-59
Hitachi Dynamic Link Manager (for Linux®) User Guide