Hitachi Dynamic Link Manager Software Users Guide for Linux

This file contains information related to errors that occurred during HDLM
installation. The following table describes the detailed information
contained in installgetras.tar.gz.
Table 7-10 Information Contained in installgetras.tar.gz
Output directory
#
File Description
output-directory-of-
collected-information-
specified-when-executing-
the- -installgetras-utility
installgetras.log Log file of the
installgetras utility
/var/log messages
OS syslog file
/var/tmp/hdlminstlog
All subdirectories and
files
Log information
created during HDLM
installation
#
This directory is created in directory-to-which-collected-information-is-
output specified when the installgetras utility was executed.
installhdlm Utility for Installing HDLM
You can use this utility to perform a new installation, upgrade installation, or
re-installation of HDLM.
The utility can also be used to perform an unattended installation. An
unattended installation enables a user to install HDLM without entering
information. Before you perform an unattended installation, you must define
the information required for installation in the installation-information
settings file.
For details about how to perform an unattended installation, see
Installing
HDLM on page 3-101.
Format
mount-point-of-HDLM-installation-media/installhdlm [-v | -h | [-f
installation-information-settings-file-name | -update ] ]
Parameters
-v
Displays the version of HDLM to be installed.
-h
Displays the format of the installhdlm utility.
-f installation-information-settings-file-name
Specify this parameter when performing an unattended installation of
HDLM. Specify the installation-information settings file for this parameter.
Utility Reference
7-43
Hitachi Dynamic Link Manager (for Linux®) User Guide