Hitachi Dynamic Link Manager Software Users Guide for Linux

Items To Be Defined in an Installation-Information Settings File
The following describes the information defined in the installation information
settings file.
[INSTALLATION_SETTINGS] section
This section defines information that is used when the installhdlm utility is
executed. Specify this section name at the beginning of the installation
information settings file (although an empty paragraph or comment line can
be inserted above this section name).
The following table lists and describes the keys defined in the
[INSTALLATION_SETTINGS] section.
Table 7-11 Keys in the [INSTALLATION_SETTINGS] Section
Key name Description
Necessity of
definition
Maxim
um
numbe
r of
charac
ters
New
installati
on
Upgrade
installati
on or re-
installati
on
licensekeyfil
e
#1
Specify the absolute path name of a
license key file that is provided in
*.plk format.
The default is /var/tmp/
hdlm_license.
If you perform an upgrade installation
or re-installation without updating the
license, delete the licensekeyfile
key and value.
Optional
#
2
Optional
#
2
1024
licensekey
#1
Specify the absolute path name of a
license key file that was created by
using the following command:
# echo "license-key" > "license-
key-file"
The default is /etc/opt/
DynamicLinkManager/dlm.lic_key.
If you perform an upgrade installation
or re-installation without updating the
license, delete the licensekey key
and value.
Optional
#
2
Optional
#
2
1024
driver_config
Specify either of the following values
to indicate whether to load the HDLM
driver and configure the HDLM device:
y: Load the HDLM driver and configure
the HDLM device (default).
n: Do not load the HDLM driver and
configure the HDLM device.
Optional Optional 1
Utility Reference
7-45
Hitachi Dynamic Link Manager (for Linux®) User Guide