Hitachi Dynamic Link Manager Software Users Guide for Linux

load_balance_type=exlio
load_balance_same_path_use_times=32
lbex_usetimes_limit=100
error_log_level=3
error_log_size=9900
error_log_number=2
trace_level=0
trace_file_size=1000
trace_file_number=4
path_health_check=on
path_health_check_interval=30
auto_failback=on
auto_failback_interval=1
# intermittent_error_monitor=off
# intermittent_error_monitor_interval=210
# intermittent_error_monitor_number=3
# dynamic_io_path_control=off
# dynamic_io_path_control_interval=10
installux.sh Utility for HDLM Common Installer
This utility determines what OS HDLM will be installed on, and installs the
corresponding version of HDLM from the DVD-ROM. This utility can also
perform unattended installations via a parameter specification.
For details about how to use this utility to install HDLM, see
Installing HDLM
on page 3-101.
Format
HDLM-installation-media-mount-point/installux.sh [-v | -h | [-f
installation-information-settings-file]
Parameters
-v
Displays the HDLM version to be installed.
-h
Displays the format of the installux.sh utility.
-f installation-information-settings-file
Specify this parameter to perform an unattended installation for HDLM.
Specify an installation-information settings file for this parameter.
For details about installation-information settings files, see
Editing an
Installation-Information Settings File on page 7-44.
Log file
The installux.sh utility outputs execution information to the log
file /var/tmp/hdlm_installux_sh.log. If the hdlm_installux_sh.log log
Utility Reference
7-51
Hitachi Dynamic Link Manager (for Linux®) User Guide