Hitachi Dynamic Link Manager Software Users Guide for Linux

Message ID Message Text Explanation
Check whether another program is
currently using this file (for
example, the file is being opened
in a text editor), or whether the
file has been inadvertently
deleted.
KAPL04009-E The option definition is invalid. Details
HDLM manager could not start
normally because some of the
definitions in the option definition
file were invalid.
Action
If the KAPL04033-W message is
output after this message,
execute the dlnkmgr view -sys
-sfunc command, and then check
the option settings.
Use the dlnkmgr set operation to
return options settings back to
where you had them.
If the KAPL04033-W message is
not output, restart HDLM
manager.
If the same error occurs, re-install
HDLM. For details on the view
operation, see
view (Displays
Information) on page 6-31. For
details on the set operation, see
set (Sets Up the Operating
Environment) on page 6-15.
KAPL04010-E Could not open the error log file. Details
HDLM manager cannot start
normally (unable to open the error
log file /var/opt/
DynamicLinkManager/log/
dlmmgr[1-16].log).
Action
Check whether another program is
using the file (for example, the file
is being opened in a text editor),
or whether the error log file has
been inadvertently deleted.
KAPL04011-E Could not output the error log
file.
Details
The log information could not be
output to the error log
file /var/opt/
DynamicLinkManager/log/
dlmmgr[1-16].log.
Action
Messages
8-33
Hitachi Dynamic Link Manager (for Linux®) User Guide