Hitachi Dynamic Link Manager Software Users Guide for Linux

Message ID Message Text Explanation
collect error information, and
then contact your vendor or
maintenance company. Refer to
the HDLM User's Guide for
instructions how to execute the
DLMgetras utility.
cc...cc: Thread ID of the process
that issued the I/O
Action
Check the following. After the
check, if the problem is not
solved, execute the DLMgetras
utility for collecting HDLM error
information, and then contact
your HDLM vendor or the
maintenance company if there is a
maintenance contract for HDLM,
and then report the error and
detail code. For details on the
DLMgetras utility, see
DLMgetras
Utility for Collecting HDLM Error
Information on page 7-3.
a. Make sure that the command
is executed by a user with
root permission.
b. The memory size is
insufficient. Stop the
unnecessary process.
c. Make sure that the IOCTL is
not issued to the device
management file (/dev/dlm/
sddlmfdrv0).
To check whether the error will
have any effect on the application,
check the application that sent the
IOCTL system call.
KAPL05701-I HDLM version aa...aa Build
bb...bb cc...cc dd...dd ee...ee
Details
The version of HDLM is shown.
aa...aa: HDLM version (character
string)
bb...bb: HDLM build number
(decimal number)
cc...cc: Days-and-months A.D
(character string)
dd...dd: Time in seconds
(character string)
ee...ee: Internal code
(hexadecimal number) (This is
information required for the
investigation at the time the
problem was generated.)
Action
None.
KAPL05704-E The LDEV information for an
HDLM device has changed. HCTL
value = aa...aa bb...bb cc...cc
dd...dd
Details
The LDEV information for the
HCTL value corresponding to an
HDLM device has changed.
Messages
8-43
Hitachi Dynamic Link Manager (for Linux®) User Guide