Hitachi Dynamic Link Manager Software Users Guide for Linux

Message ID Message Text Explanation
aa...aa ended abnormally.
aa...aa: installhdlm, or
installhdlm_analysis
Action
Check the error message that was
output just before this message,
and then perform the action
indicated in that error message.
KAPL09213-W An error occurred during aa...aa
processing.
Details
Although the aa...aa processing
has ended, an error occurred
during the processing.
aa...aa: ENVIRONMENT_SETTINGS,
driver_config_settings, or
installhdlm
Action
Review the contents of installation
information settings file when
KAPL01008-W or KAPL01009-W is
outputted before this message.
For details, see
Editing an
Installation-Information Settings
File on page 7-44.
When a message except for the
above was outputted, perform the
action indicated in that error
message.
KAPL09215-E The system environment is
invalid. Error Code = aa...aa
Details
The system environment is not
valid as an environment for
executing the installhdlm utility.
aa...aa: Error number (decimal
number) that specifies the
executed processing
Action
If the error code is 4:
The /var/tmp directory does
not have enough unused
capacity, or the user does not
have write permission for it.
Make sure there is enough
unused capacity and that the
user has write permission for
this directory, and then try
again.
If the error code is 6:
The /etc/opt directory does
not have enough unused
capacity, or the user does not
Messages
8-65
Hitachi Dynamic Link Manager (for Linux®) User Guide