Hitachi Dynamic Link Manager Software Users Guide for Linux

Message ID Message Text Explanation
Reinstall HDLM.
KAPL09295-W Restart the host to complete
installation.
Details
HDLM was installed successfully.
Restart the host to complete
installation.
Action
The manual includes the same
content. Restart the host to
complete installation.
Supplement:
The -update option should only be
used in an HDLM-SAN boot
environment. However, if the
option is used in a different
environment, one of the following
must be done:
a. If you are using the option in
an environment from which
migration to an HDLM-SAN
boot environment is not
possible:
Restart the host, and then
start the operation.
b. If you are using the option in
an environment from which
migration to an HDLM-SAN
boot environment is possible:
Restart the host, and then
migrate to an HDLM-SAN boot
environment by following the
procedure in the manual.
KAPL09296-E The upgrade of the device
management files failed.
Details
The upgrade of the device
management files failed.
Action
a. To continue HDLM
installation:
Delete the device
management files (/dev/dlm/
sddlm[af]drv0), and then
install HDLM.
b. To terminate HDLM
installation:
Restart the host to
reconfigure HDLM, and then
start the application.
KAPL09297-W Create an initial RAM disk
image, and then update the
boot loader configuration file.
Details
HDLM was installed successfully.
Create an initial RAM disk image,
and then update the boot loader
Messages
8-73
Hitachi Dynamic Link Manager (for Linux®) User Guide