Hitachi Dynamic Link Manager Software Users Guide for Linux

Outputs error information only

Outputs trace information on program operation summaries

Outputs trace information on program operation details

Outputs all trace information

For details on how to set the collection level, see

Setting Up the HDLM

Functions on page 3-190.

Collecting Error Information Using the Utility for Collecting HDLM

Error Information (DLMgetras)

HDLM has a utility for collecting HDLM error information (DLMgetras).

By executing this utility, you can simultaneously collect all the information

required for analyzing errors: information such as error logs, process-specific-

trace information files, trace files, definition files, core files, and libraries. You

can use the collected information when you contact your HDLM vendor or

maintenance company (if there is a maintenance contract for HDLM).

For details on the DLMgetras utility, see

DLMgetras Utility for Collecting HDLM

Error Information on page 7-3.

Utility for Collecting HDLM Installation Error Information

(installgetras)

HDLM has a utility for collecting HDLM installation error information

(installgetras).

By executing this utility, you can collect the logs required for analyzing errors

that occurred during installation. You can use the collected information when

you contact your HDLM vendor or maintenance company.

For details on the installgetras utility, see

installgetras Utility for Collecting

HDLM Installation Error Information on page 7-42.

Collecting Audit Log Data

HDLM and other Hitachi storage-related products provide an audit log

function so that compliance with regulations, security evaluation standards,

and industry-specific standards can be shown to auditors and evaluators. The

following table describes the categories of audit log data that Hitachi storage-