Hitachi Dynamic Link Manager Software Users Guide for Linux

Message ID Message Text Explanation
The value input into the execution
check message of the HDLM-
configuration definition utility
(dlmcfgmgr) is invalid.
Action
Enter the correct y/n value after
the KAPL10339-I message is
output. For details on the
dlmcfgmgr utility, see
dlmcfgmgr
Utility for Managing the HDLM
Configuration on page 7-22.
KAPL10328-E The entered value is invalid. The
HDLM-configuration definition
utility processing will now stop.
Execute the HDLM-configuration
definition utility again.
Details
An invalid value was entered 3 or
more times for the message
confirming the execution of the
HDLM-configuration definition
utility (dlmcfgmgr). Processing is
interrupted.
Action
Re-execute the dlmcfgmgr utility.
For details on the dlmcfgmgr
utility, see dlmcfgmgr Utility for
Managing the HDLM Configuration
on page 7-22.
KAPL10329-E A file could not be opened. File
name = aa...aa, Errno =
bb...bb. Refer to the Messages
section of the HDLM User's
Guide for instructions to correct
this problem.
Details
The file could not be opened.
aa...aa: File name
bb...bb: Error number (decimal
number)
Action
Confirm the existence of the file.
If there is no problem, and then
execute the DLMgetras utility for
collecting HDLM error information,
and then contact your HDLM
vendor or the maintenance
company if there is a maintenance
contract for HDLM.
For details on the DLMgetras
utility, see
DLMgetras Utility for
Collecting HDLM Error Information
on page 7-3.
KAPL10330-E A symbolic link cannot be
created. File name = aa...aa,
Errno = bb...bb. Execute the
DLMgetras utility to collect error
information, and then contact
your vendor or maintenance
company.
Details
An attempt to create a symbolic
link has failed.
aa...aa: File name
bb...bb: Error number (decimal
number)
Action
Messages
8-91
Hitachi Dynamic Link Manager (for Linux®) User Guide