Hitachi Dynamic Link Manager Software Users Guide for Linux

Message ID Message Text Explanation
KAPL10361-I HDLM has deactivated a path for
the HDLM device. HDLM device
= aa...aa, Device = bb...bb
(Host: cc...cc Channel: 0 ID:
dd...dd Lun: ee...ee)
Details
By executing the HDLM-
configuration definition utility
(dlmcfgmgr), the path to the
HDLM device has been made
inactive.
aa...aa: HDLM device name
bb...bb: SCSI device name
cc...cc: Host ID (decimal number)
Channel: Channel ID (fixed value:
0) (decimal number)
dd...dd: Target ID (decimal
number)
ee...ee: LUN (decimal number)
Action
None. For details on the
dlmcfgmgr utility, see dlmcfgmgr
Utility for Managing the HDLM
Configuration on page 7-22.
KAPL10362-W HDLM has detected an active
path that cannot be deleted.
HDLM device = aa...aa, Device
= bb...bb (Host: cc...cc
Channel: 0 ID: dd...dd Lun:
ee...ee). Refer to the Messages
section of the HDLM User's
Guide for instructions to correct
this problem.
Details
An attempt to execute the HDLM-
configuration definition utility
(dlmcfgmgr) failed because a path
to the specified HDLM device was
being used.
aa...aa: HDLM device name
bb...bb: SCSI device name
cc...cc: Host ID (decimal number)
Channel: Channel ID (fixed value:
0) (decimal number)
dd...dd: Target ID (decimal
number)
ee...ee: LUN (decimal number)
Action
Stop the application that uses the
HDLM device, unmount the HDLM
device being mounted, and then
re-execute the dlmcfgmgr utility.
For details on the dlmcfgmgr
utility, see
dlmcfgmgr Utility for
Managing the HDLM Configuration
on page 7-22.
KAPL10363-W A data mismatch was found.
HDLM device = aa...aa. Execute
the DLMgetras utility to collect
error information, and then
contact your vendor or
maintenance company.
Details
When HDLM configuration
Definition Utility (dlmcfgmgr) was
executed, a mismatch of HDLM
device configuration information
was detected.
Messages
8-101
Hitachi Dynamic Link Manager (for Linux®) User Guide