Hitachi Dynamic Link Manager Software Users Guide for Linux

Message ID Message Text Explanation
Edit the /etc/opt/
DynamicLinkManager/hdlm.conf
file as follows, and then restart
the host.
¢
For FC-SAN:
iscsi_boot=n
¢
For IP-SAN:
iscsi_boot=y
KAPL10949-E A necessary file was not found.
File name = aa...aa
Details
A necessary file was not found.
aa...aa: File name
Action
Reinstall an HDLM.
KAPL10950-E An error occurred during
creation of an HDLM temporary
file. File name = aa...aa. Refer
to the Messages section of the
HDLM User's Guide for
instructions to correct this
problem.
Details
An error occurred during creation
of an HDLM temporary file.
aa...aa: File name
Action
Confirm that the root directory (/)
has enough unused capacity.
If it has enough unused capacity,
execute the DLMgetras utility for
collecting HDLM error information,
and then contact your HDLM
vendor or the maintenance
company if there is a maintenance
contract for HDLM.
For details on the DLMgetras
utility, see
DLMgetras Utility for
Collecting HDLM Error Information
on page 7-3.
KAPL10959-E The configuration definition file
is invalid. Error Code = aa...aa.
Execute the DLMgetras utility to
collect error information, and
then contact your vendor or
maintenance company.
Details
The contents of the configuration
definition file (/etc/opt/
DynamicLinkManager/.dlmfdrv.c
onf) are invalid.
aa...aa: Internal code (decimal
(base-10) number)
Action
Execute the DLMgetras utility for
collecting HDLM error information,
and then contact your HDLM
vendor or the maintenance
company if there is a maintenance
contract for HDLM.
For details on the DLMgetras
utility, see
DLMgetras Utility for
8-110
Messages
Hitachi Dynamic Link Manager (for Linux®) User Guide