Hitachi Dynamic Link Manager Software Users Guide for Linux

Message ID Message Text Explanation
KAPL12321-E An invalid root partition is
specified in the file. File
name = aa...aa
Details
aa...aa: The name of the file containing
the invalid root partition entry
Action
Change the root partition specified in
the /etc/fstab file to a SCSI or HDLM
device, or specify settings so that HDLM
manages the device that is listed next to
the root partition specified in the /etc/
fstab file.
KAPL12322-I Execution of linuxrc
started.
Details
Execution of linuxrc started.
Action
None.
KAPL12323-I The insertion of the
module was started.
Module name = aa...aa
Details
The insertion of the module was started.
aa...aa: The name of the module being
inserted
Action
None.
KAPL12324-E The module could not be
inserted. Module name =
aa...aa
Details
The module could not be inserted.
aa...aa: The name of the module whose
insertion has failed
Action
Confirm that the system environments
are not changed after creating the initial
ramdisk image file.
Check whether there is a mistake in the
initial ramdisk image file specified in the
config file of the boot loader.
KAPL12325-I The command started.
Command name =
aa...aa
Details
aa...aa: The started command
Action
None.
KAPL12326-E The command could not
execute. Command name
= aa...aa
Details
aa...aa: The failed command
Action
For dracut command:
Perform the following confirmation
corresponding to the output
command, and then retry. Re-
execute the dracut command after
performing the next check according
to the outputted command.
8-118
Messages
Hitachi Dynamic Link Manager (for Linux®) User Guide