Hitachi Dynamic Link Manager Software Users Guide for Linux

Message ID Message Text Explanation
• Confirm that HDLM has
been configured.
• Take action according to
the contents output in the
log of the dlmcfgmgr utility.
• Confirm that the user has
write permission in the root
directory (/).
gzip:
Confirm that that the unused
capacity is sufficient at the
creation destination of the initial
ramdisk image file.
mke2fs or touch:
Confirm that the user has write
permission in the root directory
(/).
mkdir:
Confirm that there is enough
unused capacity and that the
user has write permission in the
following directory:
•
/etc/opt/
DynamicLinkManager.
• /opt/DynamicLinkManager.
• The root directory (/)
mount:
Confirm that there is unused
capacity in the loop device.
umount:
A temporary file remains, so do
the following:
1. Unmount
/etc/opt/
DynamicLinkManager/tmp/
initrdmnt.$$ ($$ is a
process ID).
2. Remove the
/etc/opt/
DynamicLinkManager/tmp/
initrdmnt.$$ ($$ is a
process ID) file.
vol_id:
Confirm that the file system is
created in the root directory (/)
indicated by /etc/fstab file.
Messages
8-121
Hitachi Dynamic Link Manager (for Linux®) User Guide