Hitachi Dynamic Link Manager Software Users Guide for Linux

Message ID Message Text Explanation
For the details of the parameter, see
dlmmkinitrd Utility for Supporting a
Boot Disk on page 7-33.
If the problem is not solved, execute the
DLMgetras utility for collecting HDLM
error information, and then contact your
HDLM vendor or the maintenance
company if there is a maintenance
contract for HDLM.
For details on the DLMgetras utility, see
DLMgetras Utility for Collecting HDLM
Error Information on page 7-3.
KAPL12332-E The root partition could
not be found in the file.
File name = aa...aa
Details
aa...aa: The name of the file referenced
by the dlmmkinitrd utility for supporting
the boot disk
Action
Confirm that the settings of the root
partition are in the /etc/fstab file.
Confirm that the root partition is
mounted.
KAPL12333-E An HBA that HDLM can
support as a boot disk
was not found in the file.
File name = aa...aa
Details
aa...aa: The name of the file referenced
by the dlmmkinitrd utility for supporting
the boot disk
Action
Make sure that an HBA driver that can
be used when the boot disk is an HDLM
device is in the following file:
¢
When Red Hat Enterprise Linux
AS4/ES4 or Red Hat Enterprise
Linux 5 is used:
/etc/modprobe.conf
¢
When SUSE LINUX Enterprise Server
is used:
The line of INITRD_MODULES= of
a /etc/sysconfig/kernel file
Also, make sure that the HBA driver has
been installed.
KAPL12334-E Multiple root partition
entries exist in the file.
File name = aa...aa
Details
aa...aa: The name of the file referenced
by the dlmmkinitrd utility for supporting
the boot disk
Action
Modify the fstab file specified in the
fstab parameter of the boot disk
support utility (dlmmkinitrd), and then
retry the operation. Alternatively, modify
8-124
Messages
Hitachi Dynamic Link Manager (for Linux®) User Guide