Hitachi Dynamic Link Manager Software Users Guide for Linux

Message ID Message Text Explanation
KAPL13911-E The utility for HDLM start ended
abnormally. Error Code =
aa...aa
Details
aa...aa: Error number that
identifies the executed processing
(decimal number)
Action
When the error code is 1:
When /dev/dlm/sddlmadrv0
file or a file other than
character device file, delete it
manually and then retry the
execution.
When the error code is 2:
/sbin/dlmcfgmgr file does
not exist or does not have
executable permissions.
Reinstall an HDLM.
When the error code is 3:
/etc/init.d/DLMManager file
does not exist or does not
have executable permissions.
Reinstall an HDLM.
KAPL13912-E An invalid parameter was
specified. Parameter = aa...aa
Details
aa...aa: Specified parameter
Action
Re-execute the utility for HDLM
start if necessary. Refer to
dlmstart Utility for Starting HDLM
on page 7-40.
KAPL13913-E A command has failed.
Command = aa...aa, details =
bb...bb
Details
aa...aa: Command that failed
bb...bb: Message that the
command output
Action
When the command is /sbin/
modprobe:
Reinstall an HDLM
When the command is /bin/
mknod:
Remove the error cause
described in the message
output by the command
indicated in the message
KAPL13913-E. Next, re-
execute the utility for HDLM
start if necessary. Refer to
dlmstart Utility for Starting
HDLM on page 7-40.
Messages
8-149
Hitachi Dynamic Link Manager (for Linux®) User Guide