Hitachi Dynamic Link Manager Software Users Guide for Linux

¢
In an EM64T/AMD64 environment, the RPM (Red Hat Package
Manager) packages listed below are required. Install these RPM
packages before installing HDLM:
- libstdc++- RPM package version .i686.rpm
- libgcc- RPM package version .i686.rpm
- glibc- RPM package version .i686.rpm
RPM package version depends on the OS version you are using.
#4
The connected storage system is Hitachi Universal Storage Platform V.
#5
The connected storage system is Hitachi Virtual Storage Platform G1000.
For details about Hitachi RapidXchange, see the manual File Access Library &
File Conversion Utility for Solaris HP-UX AIX Windows Tru64 UNIX NCR SVR4
DYNIX/ptx Linux.
Related Products When Using Red Hat Enterprise Linux AS4/ES4
The following describes related products when Red Hat Enterprise Linux
AS4/ES4 is used.
Cluster Software Supported by HDLM
When you use HDLM in a cluster configuration, you must install the same
version of HDLM on all the nodes that comprise the cluster. If different
versions of HDLM are installed, the cluster system may not operate correctly.
If the HDLM Version and Service Pack Version, which are displayed by
executing the following command, are the same, the versions of HDLM are
the same:
# /opt/DynamicLinkManager/bin/dlnkmgr view -sys
The following tables list related programs used when you configure a cluster:
•
Table 3-12 Cluster Software When Using Red Hat Enterprise Linux AS4
(IA32) on page 3-21
• Table 3-13 Cluster Software When Using Red Hat Enterprise Linux ES4
(IA32) on page 3-26
• Table 3-14 Cluster Software When Using Red Hat Enterprise Linux
AS4/ES4 (IPF) on page 3-31
•
Table 3-15 Cluster Software When Using Red Hat Enterprise Linux
AS4/ES4 (EM64T/AMD64) on page 3-32
3-20
Creating an HDLM Environment
Hitachi Dynamic Link Manager (for Linux®) User Guide